| A 16 channel, 40 amp capacity do it yourself board LOR control board. Like with the CTB-08 and CTB-08D you need to provide an enclosure, provide 2 power cords (one for channels 1-8, the other for channels 9-16 and the microprocessor), and 16 output cords. Without a heatsink, each channel can handle a maximum of 2 amps. Each side is capable of 15 amps. If you add a heatsink to the unit, each channel can run a maximum of 8 amps per channel. However, you are still limited to 15 amps per side. By default, this controller will only handle 30amps, 15 per side. In order to obtain a full 40amps from this controller you need to do the following: - Install 12 gauge power cords
- Upgrade to ceramic, 20amp, fast acting fuses.
 |  |  |
Downloads -- These downloads are links from the LOR Support Site: User Guide Data Sheet Blue Board Firmware Green Board Firmware
|
Last Updated ( Tuesday, 07 October 2008 19:41 )
|