|
Description of the PC line is from the LOR Store. Chuck Smith, considered by many to be the father of computerized Christmas displays, started PlanetChristmas over 10 years ago as a place for people to learn how to light up the world. The members of PlanetChristmas became pioneers in animated displays, building their own home brew systems and starting a trend that has now brought joy to millions all over the world. The CTB16PC was designed with those pioneers in mind. People on a budget or who just like to build things can use the CTB16PC to create displays that will simply astound people. You can purchase the CTB16PC card fully assembled. The assembled card can be ordered with or without heatsinks. If you purchase it with High Power Heatsinks it will be delivered with the heatsinks installed and ready to insert into the optional outdoor enclosure. You can purchase the CTB16PC card as a kit. The Kit is supplied with all parts required to build a functioning light controller. The CTB16PC kit even includes items such as solder and thermal compound. To be mounted in the optional outdoor enclosure you must order the optional High Power Heatsinks. |
|
A fully assembled card. You select the options you want to complete your controller.
| This card is ready to go. No soldering is required. You supply additional parts such as power cords and enclosure. Select any of the options that you need to complete the controller.
Remember you need the High Power Heatsink if you order the Enclosure.
(optional heatsinks shown in picture)
We recommend High Power Heatsinks for long controller life. You can order low power heatsinks installed for no additional charge. Just select Low Power HS under the Heatsink selection box. |
|
|
|
A fully assembled card with all options required to complete the building of a 30Amp, Outdoor Lighting Controller. Â  | No soldering is required. You get everything you need to build a 30 amp computerized Light Controller housed in a weather resistant plastic enclosure.
With a few hand tools you can put together this 16 channel controller that works in conjunction with the Light-O-Rama ShowTime software to produced amazing light shows. |
|
|
This kit requires soldering. You select the additional options to complete your controller. 
| This is a kit that requires soldering. All parts required to build a functioning controller card are included. The kit even includes the solder! You supply additional parts such as power cords and enclosure. Select any of the options that you need to complete the controller.
Remember you need the High Power Heatsink if you order the Enclosure.
|
|
| Â Soldering is required. You get everything you need to build a 30 amp computerized Light Controller housed in a weather resistant plastic enclosure.
First you build the circuit board kit. Then with a few hand tools you put together this 16 channel controller that works in conjunction with the Light-O-Rama ShowTime software to produced amazing light shows. | Â  |
|
| No soldering is required. No assembly required. You get a fully assembled and tested 30 amp computerized Light Controller housed in a weather resistant plastic enclosure.
Compared with our ShowTime products, this is a lighter duty controller with less bells and whistles but it has the same lighting effects as the ShowTime units.
| Â   | Â This controller is ready to plug in. This unit does not have the Unit ID switches found on the deluxe units so you must connect this it to your PC or Laptop to set the Unit ID. Once the Unit ID is set, this controller is ready to go. Note: This controller cannot run standalone it must be connected to a PC or a LOR Director Unit. |
|
|
Weatherproof enclosure for the PC series |
|
16 Output Cords - Outdoor Rating. 6 output cords each 18 inches long. A three hole receptacle on one end (NEMA 5-15R), other end has 1/4", fully insulated quick connects on hot and neutral, #10 ring on ground. Ready to be used with a PC series controller.
Wire is 18awg. Insulation is Black, SJTW rated for outdoor use.
This is the cord used in the Light-0-Rama PC-series "Complete" products. |
|
Last Updated ( Sunday, 30 March 2008 20:05 )
|
|
Two 15A Supply Cords - Outdoor Rating. 2 supply cords each 6 feet long. A three blade plug on one end (NEMA 5-15P), other end has 1/4", fully insulated quick connects on hot and neutral, #10 ring on ground. Ready to be used with a PC series controller.
Wire is 14awg. Insulation is Black, SJTW rated for outdoor use.
This is the cord used in the Light-0-Rama PC-series "Complete" products. |
|
|
|
|
|
|
